Skip to main content

How To Install A Kitchen Faucet With Pull Down Sprayer

How To Install A Kitchen Faucet With Pull Down Sprayer

Unscrew the aerator at the tip of the faucet spray head. Turn on the faucet to let water flush through the pipes and the spout. Replace the aerator. Tip: In any faucet installation, always finish by taking off the aerator and flushing out the pipes.
Install the New Faucet. Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate. Feed faucet lines into the hole(s). Install washers and nuts underneath the sink. For pulldown faucets, attach the quick-connect hose to the supply pipe. Connect water supply lines.
A pull down kitchen faucet brings a contemporary style into your kitchen and modernizes. A pull out kitchen faucet can be elaborate or a basic pull out sprayer.
To remove the old faucet, you'll first need to go under the sink and disconnect the supply lines that run from the faucet down to the hot and cold valves. Each supply line is connected to the corresponding valve by a threaded nut. Use an adjustable wrench to remove each nut by turning it counterclockwise.
pH7 Single Handle Pull Down Sprayer Kitchen Sink Faucet Brushed Nickel Kitchen Faucets with. Single-hole or three-hole installation (escutcheon included).

Leave a Reply